The feed mixer machine adopts horizontal design, with three-tier spiral ribbon auger

The feed mixer machine adopts horizontal design, with three-tier spiral ribbon auger, the feed mixer machine may have three layers of materials flows.During the processing, mixing materials rapidly and evenly.Firstly the materials feed into the mixing drum via the conveying pipe, then the materials will be mixed by the screw ribbon, the finished product is unloading into the storage hopper from the second conveying pipe, finally pack the products by the packing machine, then the production progress is finished. The Horizontal Ribbon Mixer consist of U-Shape tank, spiral ribbon and drive parts. The ribbon is dual structure. Outer spiral ribbon make the material move from the sides to the center of the tank and the inner ribbon moves the material from the center to the sides to get the convective mixing,the feed mixer machine is used with feed pellet machine for feed pellet making . The mixture effect is high. The cover of the tank can be made as open in order to cleaning and change parts easily.this feed blender machine has two ribbon inside. The outer ribborn make the material move from the sides to the center of the tank and the inner ribborn moves the material from the center to the sides to get the convective mixing.

Features of feed mixer machine
1. feed mixer machine has widely applicable range: this device can meet the different performance requirements of dry mortar, such as plastering mortar, masonry mortar, insulation mortar, decoration mortar and so on all kinds of dry powder mortar.
2.Cost-effective: used for dry mortar and decoration mortar production projects, with less investment, high efficiency, and avoid the idle and waste of resources which caused by excessive investment in equipment.
3. feed mixer machine has simple and convenient operation: the advantages of this type dry mortar mixer is a small coverage, low energy consumption, easy operation,installed directly, per hour 6-20 tons, 1-3 workers operation.

mixer (2) feed mixer

In Ribbon feed blender the powder moves from center to the end of container and end of container to the center of container

In Ribbon feed blender the powder moves from center to the end of container and end of container to the center of container. Hence requirement of total mixing time is very less and the RPM required are also very less. The dry material gets sufficient continuous movement due to the shape & movement of ribbon & shape of the container. Which moves material for good quality of blending? The unit is consist of one electrical motor, one worm reduction gear, belt drive between motor and gear, couple drive between gear to ( ribbon ) mixing stirrer. Container having four nos. of legs with discharge valve & top cover. Both end of mixing shaft is sealed with bush & PTFE gland housing & safety guards are provided on all moving parts.The machine adopts horizental body, covers small area, automatic charging, easy operate, double helix structure, simple maintenance, high efficient, save both time and labor. Complete shut–up, No vibration, no noise and dust.the feed mixing machine is very popular at home and abroad.the feed blender can also be used in powder and paste paint putty powder mixing used with feed pellet machine for feed pellet making. it is a multi-functional dry wet amphibious mixing  blender first made in China. the feed blender is suitable for building chemical, food,medicine, plastic industry and so on.the feed blender machine uses 350 type gear reducer. The mixing motor adopts 7.5KW copper wire.The support uses more upset box iron support. The bearing adopts double containment P12 bearing. The thickness of the helix is 8mm wear-resisting steel plate. All of these designs help to improve the applicability of the product and guarantee the production.

feed mixer mixer (2) IMG_0830

all of our powder feed mixer can tolerate about 10% liquid additives

Adding a liquid and pasty materials mixed in the ribbon feed mixer for viscous of cohesive ganule mixing and granule has a good effect, cylinder cover can be made of a wide-open door, so that the equipment for cleaning. the feed blender can be added to the mixer barrel outer jacket, cooling or heating of the material is achieved by injecting the cooling medium to the jacket. Discharge in the form of a phenomenon of material accumulation and mixing dead ends, reliable trim seal, frequent switching lakage.Ribbon mixer is characterized by high mixing precision, and wide application to food, chemical industries, and building lines used with feed pellet mill for making feed pellet. The major sections of a mixer are barrel, ribbon agitators, feeding ports, discharging port and driven unit!!
Double ribbon mixer drive the material from two ends to centre through the help of the outer ribbon, while the inner ribbon push the material from centre to two ends, thus, material achieve a high mixing effect at short time!
Our ribbon mixer can be equipped with heating or cooling jacket if temperature control is required. Besides, all of our powder feed mixer can tolerate about 10% liquid additives! We will add spraying or atomizing unit inside the tank!

Main features of feed mixer:

(1).Short mixing time, high mixing degree of homogeneity:The general material’s degree of homogeneity CV≤5% between 45 and 90 seconds.

(2)The variable range of loading is big: the coefficient of filling is from 0.1 to 0.8,so that it can be applicable to the mixture of different materials with different specific gravity and granularity.

(3) Fast discharge, and leftover is small: The base adopts double- pen long door structure, so discharge fast.

(4)The material can be mixed evenly when added 30% liquid; viscous materials can also be mixed.

(5)The mixing soft make it be used for drying and cooling: Because of it mixing soft,not damage the material’s essence, it can be added hot air or cold wind system to be used for drier or cooler.